Customized LCD Display what you need to know

Customized LCD Display what you need to know

Customized LCD Display come in a wide variety of styles. These displays range from the most cutting-edge to the most outdated. Even Nevertheless, LCD screens utilize advanced technology that is nonetheless classified as “old.” It is the purpose of this essay to give the reader an overview of the pros and disadvantages of each display method.

Segment LCDs, also known as static or direct drives, are an older technology, yet they are still widely used in today’s digital world. These displays have been in use for a long time and are known for their reliability. They don’t appear to be going anywhere anytime soon.

Simplicity is the primary focus of this display. Letters, numbers, and icons are all that they do. A touch screen or any other human interface is absent from the vast majority of these devices. They don’t usually have a controller/driver chip installed.

Static/direct drive LCDs can be reduced to a simple formula of one pin for each section. Seven pins are required to show a seven-segment number. If you increase the number of backplanes and convert this to a multiplex display, this is an exception to the rule.

What’s the point of using one of these LCDs?

While monochromatic Customized LCD Display panels are straightforward and uninteresting, several important factors to consider when selecting which LCD types to go with.

LCD Displays with Low Power Consumption

The monochromatic LCD has a significant advantage in terms of power consumption. They draw only a tiny amount of electricity to run. When all you have is a battery for electricity, this is a great option. These displays can run at a voltage of 3.0, 3.3, or even 1.7 volts. For a show without a backlight, the current draw can be as low as 6uA per cm2. It is essential to keep in mind that the LCD’s power consumption increases as its operational temperature decreases.)

LCD Displays That Can Be Modified

The vast majority of our static or multiplex displays are tailored to match the needs of our customers. This is a significant benefit to keep in mind when making your final decision on the type of LCD panel you’ll select.

A custom static or multiplex display allows you to have the show designed to your specifications. The following choices are available:

  • Negative or positive mode 
  • Negative or positive mode 
  • The angle of view (6:00/12:00)

There is a reduced tooling or NRE (non-recurring engineering cost) and lower MOQ (minimum order quantities) for this type of display compared to newer technologies.

Using a static or multiplex LCD is ideal for displaying minimal information at a low cost and operating on a low power budget.


In terms of energy efficiency, LCDs are a popular choice. LCDs use less electricity than non-LCD devices, yet they still need the power to illuminate their pixels. Compared to a CRT, for example, a conventional LCD consumes around a quarter less electricity. The lower utility bills that come with LCDs are a result of this. You’ll save money on utility bills if you buy an LCD instead of a non-LCD device.

Leave a Reply

Your email address will not be published. Required fields are marked *